キャブ同調

Adjusting the synchoronisation

• Unscrew screw (3) until the

throttle valves on both
carburettors can be fully
closed.

Unscrew screw (5) untile there is a
space between it and levers (6).

• Fully close the throttle valves on

the rear carburettor by pulling the
control link firmly upwards: the
lever (6) moves in the direction shown by the arrow and rests against stop (7)which compresses spring (8).

This spring is rested against "U" shaped fork (9), which controls the front carburettor: the throttle valves on this carburettor are also fully closed.

• In this position, screw in screw (5) until the end just makes contact with levers (6).

Good luck !!